RepRap Sintron Prusa i3 3D Printer

Just a Couple of random pics from the printer i will be adding a ton more of my projects to the site soon

P1200716

one of the first 10mm calibration cubes printed at 0.3mm layer height.

P1200720

Another one of the 10mm calibration cubes printed at 0.2mm layer height this time.

P1200755

One of two quick brackets for the LCD Controller to replace my quick cardboard cut out stand.

P1200723

Back Top of 10mm endstop bracket for my 8mm rods FAIL!!! 🙂

P1200721

Back of 10mm endstop bracket for my 8mm rods FAIL!!! 🙂

P1200726

Top of 10mm endstop bracket for my 8mm rods FAIL!!! 🙂

P1200732

Eiffel Tower That started well

P1200733

Eiffel Tower and got better

P1200752

But then Cocked its leg

P1200748

and what looks like some kind of over fill put the finishing touches on this Fail!!! 🙂

P1200743

The final Eiffel Tower

P1200737

Some new endstop mounts and another extruder holder just in case this one broke

P1200742

Close up of new endstop mounts

P1200745

Close up of MK8 Light extruder holder just in case this one broke

P1200761

Printing a filament holder using hairspray to stick it to the bed at 90c using 40% honey comb fill.

P1200762

Slight lifting pf the filament holder using hairspray to stick it to the bed.

P1210098

Final prints had a few problem like the perimeters not adhering to the in fill so i patched it up with lots of supper glue.

P1210100

They might be a little wonky but the filament spool holds up nicely on them for now.

P1210101

MK8 Heavy duty extruder holder, capacitive sensor mount and filament cooling nozzle.

P1210104

Thes prints still had issues with the perimeter bonding to the infill so i reprinted them once i had tweaked the layer width from 0.35mm to 0.5mm which is working much better.

P1210106

Top view of the failed prints assembled.

P1210109

Side view of the failed prints assembled.

P1210114

Front view of the failed prints assembled.

Leave a Reply